Buy stockabbigliamento.eu ?
We are moving the project
stockabbigliamento.eu .
Are you interested in purchasing the domain
stockabbigliamento.eu ?
domain@kv-gmbh.de · 0541-91531010
Buy stockabbigliamento.eu ?
Is this a fast charger?
Without specific details about the charger in question, it is difficult to determine if it is a fast charger. Fast chargers typically have higher power outputs, such as 18W or higher, and are designed to charge devices more quickly than standard chargers. If the charger in question has a high power output and is labeled as a fast charger by the manufacturer, then it is likely a fast charger. However, without more information, it is impossible to definitively say whether it is a fast charger. **
Why is my fast charger not working?
Your fast charger may not be working due to a few possible reasons. It could be a faulty charger or cable, a problem with the power source or outlet you are using, or an issue with the device you are trying to charge. Make sure to check all components for any visible damage or debris, try using a different power source or outlet, and test the charger with another device to determine the root cause of the problem. If none of these solutions work, it may be best to contact the manufacturer for further assistance. **
Xtar SC2 Fast Charger for Li-ion Batteries
The Xtar SC2 charger for Li-ion batteries has a micro-USB charging supply which makes it portable worldwide. With a double-slot design, this charger has a USB micro port that is compatible with 5.0 Volt USB connections, which includes laptops and power banks. A USB adapter is not included, if you do not own one that is 15W, you add one on in the ‘optional bundle’ section to ensure optimum performance. Supports 0.5A, 1A and 2A charging currents. So, for example, two batteries can be charged at 1A or one battery can be charged at 2A. The higher the Amp, the faster the charge. It is high quality, compact and easy to use charger and has the following features: Charging progress displayed though LED indicators. 3.6V/3.7V Li-ion charging current: 2A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Over-discharged cells can be gradually revived through the 0V battery activation feature. Has a soft start feature which when the charging cycle begins, the charging current is slowly increased to protect and prolong the batteries life. Suitable for recharging Li-ion battery size codes: 18650, 18700, 20700, 21700, 22650, 25500 and 26650 with a nominal potential of 3.6V or 3.7 Volts. OPTIONAL BUNDLE: None, Inc. Wall Adapter
13,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Xtar VC8 Fast USB Battery Charger for Li-ion Batteries
Conveniently powered by a USB-C supply, the new Xtar VC8 charger accepts up to eight batteries for simultaneous charging, depending on battery type. Highly portable; it connects to PC USB sockets or solar and smartphone chargers. sing clear LCD readouts, the voltage capacity, internal resistance and cell type will be displayed. A USB wall adapter is not included in this set but can be added in the bundles section on this page, it should be noted that if you are using your own adapter, it should be of 15W so that the charger can run at peak performance. The versatile VC8 Charger has the ability to charge 1.2 Volt NiMH/NiCd AAAA, AAA, AA, A, SC and C cells as well as Li-ion/IMR/INR/ICR 3.6V/3.7V battery codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500 and 26650. Also, it will charge protected and unprotected 20700 and 21700 cells. Other key features include: Input: QC3.0 i.e. 5 Volts 2 Amps or 9 Volts 2 Amps Channel 1 and 8 have a peak output of 3V that can be adjusted down to 2A, 1A, 0.5A, or 0.25A for each slot. He higher the Amp, the quicker the battery will charge. At the end of the charging cycle, maximum potential is 4.2V (± 0.05V) or 1.45V (±0.1 Volts. Selects 0△V (zero delta voltage) and -△V (minus delta) modes automatically to enhance cell performance. Automatic safety protection against polarity errors, overcharging and short circuit. Flame-retardant construction. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 4 (applies when charging 4 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 2 / 0.5A × 4 (applies when charging 1–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has ensured it can get as much information on the condition of your batteries as possible, to ensure high quality charging. Grade mode (through channels 1 to 4) tests the batteries capacity through charge, discharge and repeated charge cycles and storage mode will double check for correct voltage level. Dimensions: 194mm (length) x 134mm (width) x 34 millimetres (height). Net weight: 350 grammes. Recommended operating temperature range: 0° to 40°C. OPTIONAL BUNDLE: None, Inc. Wall Adapter
34,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Similar search terms for Xtar-SC2-Fast-Charger
Top-Angebote
Products related to Xtar-SC2-Fast-Charger:
-
Xtar MC4S Charger for Li-ion BatteriesHighly efficient, the new Xtar MC4S charges up to four Ni-MH, Ni-CD or Li-ion batteries at once. It represents excellent value and is a respected leader in its category. This pack includes a USB-C to USB-C power cable; however, a USB wall adapter is not included in this set, but the option to add one on is available in the bundles section above. We recommend if you are going to use your own adaptor, to check that it is 15W as this is required for optimal performance. Convenient to use worldwide, this charger is compatible with wall adapters, smartphone and solar chargers as well as power banks and computers. To ensure your batteries receive high-quality charging, Xtar have included a self-selected 0V trickle charge phase especially for totally discharged cells, to maximise battery life. It will also automatically switch between constant current fast charge, to constant voltage phase when the batteries are near the end of their charging cycle, for full battery potential. Additional features include: Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells, including size codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500 and 26650. Accepts two 26650 batteries (CH1 and CH4) and two unprotected type 21700 batteries (in CH2 and CH3) simultaneously. Not for use with protected type 20700 and 21700 cells. Charging current of 1 Amp (through two ports) or 0.5A (through four ports). The higher the Amp, the quicker the battery will charge, with a maximum potential: 4.2 Volts. Operating temperature range: 0°C (minimum) to 40° Celsius (maximum). Flame-retardant casing. Xtar have also ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 2 (applies when charging 2 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. so ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Dimensions: 100mm (length) x 97mm (width) x 26.5 millimetres (height). Net weight: 95 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC6C USB Battery Charger for Li-ion BatteriesA market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter21,49 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VP4 Plus Dragon Charger Set for Li-Ion BatteriesUnlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!62,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MX4 Mini Mixer 1.5V, 3.7V Lithium & AA/AAA NiMH ChargerThe Xtar MX4 Mini Mixer is a compact four-slot charger designed to handle multiple battery chemistries at the same time. Each bay identifies the inserted cell type automatically and applies a suitable charging profile for lithium-ion (3.6/3.7 V), lithium iron phosphate (3.2 V), 1.5 V lithium rechargeable cells, and standard 1.2 V NiMH batteries. Its USB-C power input and independent slot control make it suitable for mixed-chemistry charging scenarios without manual current selection. The charger accepts a broad range of cylindrical formats, from small 10440 cells up to unprotected 21700 batteries, as well as AA/AAA 1.5 V lithium and NiMH types. A mode switch allows the user to select between a general charging mode and a LiFePO?-specific mode, ensuring correct voltage and termination behaviour. Charge progress is shown through individual LEDs, and built-in protections manage over-charge, short-circuit conditions, and activation of deeply discharged cells where appropriate. Key features Four independent charging slots capable of handling different chemistries simultaneously. Automatic recognition of Li-ion, LiFePO?, 1.5 V lithium, and NiMH cell types. Support for a wide range of cylindrical sizes including 10440, 14500, 16340, 18350, 18500, 18650, 18700, 20700 and unprotected 21700. Compatibility with AA/AAA 1.5 V lithium and AA/AAA/A/SC NiMH cells. Selectable standard and LiFePO? charging modes. Automatic charge termination based on chemistry-specific detection methods. Low-voltage activation for suitable over-discharged cells. LED indicators for real-time charge status on each slot. Mechanical support for batteries between roughly 34 mm and 70 mm in length. Not compatible with protected 21700 cells due to extended length. Technical specifications Model: Xtar MX4 Mini Mixer Slots: 4 independent charging bays Supported chemistries: Li-ion 3.6/3.7 V, LiFePO? 3.2 V, 1.5 V lithium rechargeable, NiMH 1.2 V Input: USB-C, 5 V 2 A Charging current: Up to 1 A on two slots, or 0.5 A when all four slots are used Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Battery length range: Approx. 34–70 mm Supported Li-ion sizes (3.6/3.7 V): 10440, 14500, 16340, 18350, 18500, 18650, 18700, 20700, unprotected 21700 Supported NiMH sizes (1.2 V): AAA, AA, A, SC Supported 1.5 V lithium sizes: AA, AAA Charging modes: Standard mode and LiFePO? mode Charge indication: LED status lights per slot Protection features: Over-charge, short-circuit, and low-voltage activation Supported 21700 types: Unprotected only OPTIONAL BUNDLE: None, Inc USB-C Wall Adaptor + 4 x AA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AAA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AA & 4 x AAA Lithium Batteries, Inc 4 x AA Lithium Batteries, Inc 4 x AAA Lithium Batteries, Inc 4 x AA & 4 x AAA Lithium Batteries26,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Does a fast charger damage the battery?
Fast chargers can potentially damage a battery if they are not designed to handle the specific battery type and charging rate. Overcharging or overheating the battery can lead to degradation and reduced lifespan. However, if the fast charger is designed to work with the specific battery type and has built-in safety features to prevent overcharging and overheating, it should not damage the battery. It's important to use a fast charger that is compatible with the battery and to follow the manufacturer's recommendations for charging. **
-
Is the fast charger also usable for devices without fast charging function?
Yes, a fast charger can be used for devices without fast charging function. The fast charger is designed to be backward compatible, meaning it can still charge devices that do not have fast charging capabilities. However, the device will only charge at its regular speed, not at the faster speed that the fast charger is capable of delivering to compatible devices. So, while it will work for non-fast charging devices, it won't provide any additional benefit in terms of charging speed. **
-
How many watts does the fast charger have?
The fast charger has 25 watts. **
-
What is a fast charger for the iPhone 11?
A fast charger for the iPhone 11 is a charger that is capable of delivering higher power output to the device, allowing it to charge at a faster rate compared to standard chargers. These chargers typically support USB Power Delivery (USB-PD) technology, which enables faster charging speeds. Fast chargers for the iPhone 11 can significantly reduce the time it takes to recharge the device, making them a convenient option for users who need a quick battery top-up. **
Xtar VC4SL USB Battery Charger for Li-Ion and NiMH Batteries
The VC4SL Battery Charger Set from Xtar includes a charger, USB-C to USB-C charge cable and manual, presented in a premium pouch. Designed for use with compatible AAAA, AAA, AA, A, SC, C, and Ni-MH/Ni-CD cells, as well as Xtar 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650, 32650 3.6V/3.7V Li-ion batteries, this specialist charger is cost-effective and versatile. This charger will charge 4 smaller cells or 2 large C cells simultaneously. With the capacity to charge up to four cells simultaneously or independently, the Xtar VC4SL battery charger is a practical option, while its intelligent design means that it can automatically detect battery types, and select the appropriate charging method and current for them (from 0.1A to 1.0A and up to 0.5A*4 / 1.0A*2 max). It will also notify you if the cells you are trying to charge are faulty or if it detects reverse polarity. The Xtar VC4SL charger's cycle has three stages to prolong the life of your cells, and a soft start to minimise drain and damage from sudden energy spikes. Dependable and safe, it also has an accurate LCD display. The maximum number of batteries which can be charged simultaneously is dependant on the type of battery used. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) AA/AAA 1.5V Li-ion charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This charger does not come with a wall adaptor and we recommend adding the 'optional bundle' when purchasing. This charger cannot be powered by a low power mobile phone charger and needs a 15W or 3A wall adaptor like a USB-C laptop or large tablet adaptor. OPTIONAL BUNDLE: None, Inc. Wall Adapter
26,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Xtar MX8 8-Slot 1.5V, 3.7V Lithium & AA/AAA NiMH Smart Charger
The Xtar MX8 is an eight-slot smart charger designed for environments where multiple rechargeable battery chemistries must be managed simultaneously. Each bay operates independently, applying charge profiles tailored to the cell type inserted. The platform supports 1.5 V lithium AA/AAA rechargeables, 1.2 V NiMH AA/AAA, and 3.6/3.7 V lithium-ion cylindrical cells, making it the first charger in its class capable of handling all three categories within a single system. USB-C input delivers regulated power to the internal distribution system, enabling consistent charging behaviour across all eight bays. Automatic identification assigns the appropriate voltage and termination method to each slot, while LED indicators provide real-time status feedback. The charger accepts a wide range of cylindrical sizes used in consumer electronics and industrial equipment, and does not impose a maximum battery capacity limit—the charger determines completion based on voltage detection rather than rated mAh. Key features Eight fully independent charging slots for simultaneous multi-chemistry operation. Supports all three major rechargeable types: 1.5 V AA/AAA lithium, 1.2 V AA/AAA NiMH, and 3.6/3.7 V lithium-ion (e.g. 18650 series). First charger in its category to accommodate all three chemistries in a single unit. No maximum battery capacity limitation; charging completion is determined by voltage behaviour, not rated mAh. Automatic recognition of chemistry and assignment of charge parameters. USB-C power input with regulated channel distribution. LED indicators providing charge and completion status for every slot. Cylindrical Li-ion support including 10440, 14500, 16340, 18500, 18650, and unprotected 21700. AA/AAA support for NiMH and 1.5 V lithium rechargeable types. Integrated short-circuit, over-charge and thermal protection systems. Low-voltage activation for lithium-ion cells that have dropped below normal operating voltage. Technical specifications Model: Xtar MX8 Smart Charger Total bays: 8 independent charging channels Supported chemistries: 3.6/3.7 V Li-ion, 3.2 V LiFePO?, 1.5 V lithium rechargeable, 1.2 V NiMH Input: USB-C, 5 V supply Charging current: Automatically allocated based on slot occupancy Li-ion formats: 10440–20700 and unprotected 21700 NiMH formats: AA, AAA 1.5 V lithium formats: AA, AAA Capacity limit: No maximum mAh rating; supported capacity is unrestricted Indicators: Dedicated LEDs for each slot Safety functions: Over-charge, short-circuit, thermal and low-voltage recovery 21700 support: Unprotected only OPTIONAL BUNDLE: None, Inc USB-C Wall Adaptor + 4 x AA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AAA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AA & 4 x AAA Lithium Batteries, Inc 4 x AA Lithium Batteries, Inc 4 x AAA Lithium Batteries, Inc 4 x AA & 4 x AAA Lithium Batteries
51,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Is there a fast charging cable for the charger?
Yes, there are fast charging cables available for chargers. These cables are designed to support higher power outputs, allowing devices to charge at a faster rate. When using a fast charging cable with a compatible charger and device, you can significantly reduce the time it takes to charge your device compared to a standard cable. It is important to ensure that both the cable and the charger support fast charging technology for optimal results. **
Why is the new Fast Charger Adapter not working?
The new Fast Charger Adapter may not be working due to a few possible reasons. It could be a compatibility issue with the device being charged, as not all devices are compatible with fast charging technology. Another reason could be a faulty adapter or cable, which may need to be replaced. Additionally, there could be an issue with the power source or outlet being used, so trying a different outlet or power source may help troubleshoot the problem. **
Top-Angebote
Products related to Xtar-SC2-Fast-Charger:
-
Xtar SC2 Fast Charger for Li-ion BatteriesThe Xtar SC2 charger for Li-ion batteries has a micro-USB charging supply which makes it portable worldwide. With a double-slot design, this charger has a USB micro port that is compatible with 5.0 Volt USB connections, which includes laptops and power banks. A USB adapter is not included, if you do not own one that is 15W, you add one on in the ‘optional bundle’ section to ensure optimum performance. Supports 0.5A, 1A and 2A charging currents. So, for example, two batteries can be charged at 1A or one battery can be charged at 2A. The higher the Amp, the faster the charge. It is high quality, compact and easy to use charger and has the following features: Charging progress displayed though LED indicators. 3.6V/3.7V Li-ion charging current: 2A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Over-discharged cells can be gradually revived through the 0V battery activation feature. Has a soft start feature which when the charging cycle begins, the charging current is slowly increased to protect and prolong the batteries life. Suitable for recharging Li-ion battery size codes: 18650, 18700, 20700, 21700, 22650, 25500 and 26650 with a nominal potential of 3.6V or 3.7 Volts. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VC8 Fast USB Battery Charger for Li-ion BatteriesConveniently powered by a USB-C supply, the new Xtar VC8 charger accepts up to eight batteries for simultaneous charging, depending on battery type. Highly portable; it connects to PC USB sockets or solar and smartphone chargers. sing clear LCD readouts, the voltage capacity, internal resistance and cell type will be displayed. A USB wall adapter is not included in this set but can be added in the bundles section on this page, it should be noted that if you are using your own adapter, it should be of 15W so that the charger can run at peak performance. The versatile VC8 Charger has the ability to charge 1.2 Volt NiMH/NiCd AAAA, AAA, AA, A, SC and C cells as well as Li-ion/IMR/INR/ICR 3.6V/3.7V battery codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500 and 26650. Also, it will charge protected and unprotected 20700 and 21700 cells. Other key features include: Input: QC3.0 i.e. 5 Volts 2 Amps or 9 Volts 2 Amps Channel 1 and 8 have a peak output of 3V that can be adjusted down to 2A, 1A, 0.5A, or 0.25A for each slot. He higher the Amp, the quicker the battery will charge. At the end of the charging cycle, maximum potential is 4.2V (± 0.05V) or 1.45V (±0.1 Volts. Selects 0△V (zero delta voltage) and -△V (minus delta) modes automatically to enhance cell performance. Automatic safety protection against polarity errors, overcharging and short circuit. Flame-retardant construction. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 4 (applies when charging 4 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 2 / 0.5A × 4 (applies when charging 1–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has ensured it can get as much information on the condition of your batteries as possible, to ensure high quality charging. Grade mode (through channels 1 to 4) tests the batteries capacity through charge, discharge and repeated charge cycles and storage mode will double check for correct voltage level. Dimensions: 194mm (length) x 134mm (width) x 34 millimetres (height). Net weight: 350 grammes. Recommended operating temperature range: 0° to 40°C. OPTIONAL BUNDLE: None, Inc. Wall Adapter34,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC4S Charger for Li-ion BatteriesHighly efficient, the new Xtar MC4S charges up to four Ni-MH, Ni-CD or Li-ion batteries at once. It represents excellent value and is a respected leader in its category. This pack includes a USB-C to USB-C power cable; however, a USB wall adapter is not included in this set, but the option to add one on is available in the bundles section above. We recommend if you are going to use your own adaptor, to check that it is 15W as this is required for optimal performance. Convenient to use worldwide, this charger is compatible with wall adapters, smartphone and solar chargers as well as power banks and computers. To ensure your batteries receive high-quality charging, Xtar have included a self-selected 0V trickle charge phase especially for totally discharged cells, to maximise battery life. It will also automatically switch between constant current fast charge, to constant voltage phase when the batteries are near the end of their charging cycle, for full battery potential. Additional features include: Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells, including size codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500 and 26650. Accepts two 26650 batteries (CH1 and CH4) and two unprotected type 21700 batteries (in CH2 and CH3) simultaneously. Not for use with protected type 20700 and 21700 cells. Charging current of 1 Amp (through two ports) or 0.5A (through four ports). The higher the Amp, the quicker the battery will charge, with a maximum potential: 4.2 Volts. Operating temperature range: 0°C (minimum) to 40° Celsius (maximum). Flame-retardant casing. Xtar have also ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 2 (applies when charging 2 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. so ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Dimensions: 100mm (length) x 97mm (width) x 26.5 millimetres (height). Net weight: 95 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC6C USB Battery Charger for Li-ion BatteriesA market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter21,49 £*Shipping: 2,49 £Secure redirect to the provider
-
Is this a fast charger?
Without specific details about the charger in question, it is difficult to determine if it is a fast charger. Fast chargers typically have higher power outputs, such as 18W or higher, and are designed to charge devices more quickly than standard chargers. If the charger in question has a high power output and is labeled as a fast charger by the manufacturer, then it is likely a fast charger. However, without more information, it is impossible to definitively say whether it is a fast charger. **
-
Why is my fast charger not working?
Your fast charger may not be working due to a few possible reasons. It could be a faulty charger or cable, a problem with the power source or outlet you are using, or an issue with the device you are trying to charge. Make sure to check all components for any visible damage or debris, try using a different power source or outlet, and test the charger with another device to determine the root cause of the problem. If none of these solutions work, it may be best to contact the manufacturer for further assistance. **
-
Does a fast charger damage the battery?
Fast chargers can potentially damage a battery if they are not designed to handle the specific battery type and charging rate. Overcharging or overheating the battery can lead to degradation and reduced lifespan. However, if the fast charger is designed to work with the specific battery type and has built-in safety features to prevent overcharging and overheating, it should not damage the battery. It's important to use a fast charger that is compatible with the battery and to follow the manufacturer's recommendations for charging. **
-
Is the fast charger also usable for devices without fast charging function?
Yes, a fast charger can be used for devices without fast charging function. The fast charger is designed to be backward compatible, meaning it can still charge devices that do not have fast charging capabilities. However, the device will only charge at its regular speed, not at the faster speed that the fast charger is capable of delivering to compatible devices. So, while it will work for non-fast charging devices, it won't provide any additional benefit in terms of charging speed. **
Similar search terms for Xtar-SC2-Fast-Charger
-
Xtar VP4 Plus Dragon Charger Set for Li-Ion BatteriesUnlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!62,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MX4 Mini Mixer 1.5V, 3.7V Lithium & AA/AAA NiMH ChargerThe Xtar MX4 Mini Mixer is a compact four-slot charger designed to handle multiple battery chemistries at the same time. Each bay identifies the inserted cell type automatically and applies a suitable charging profile for lithium-ion (3.6/3.7 V), lithium iron phosphate (3.2 V), 1.5 V lithium rechargeable cells, and standard 1.2 V NiMH batteries. Its USB-C power input and independent slot control make it suitable for mixed-chemistry charging scenarios without manual current selection. The charger accepts a broad range of cylindrical formats, from small 10440 cells up to unprotected 21700 batteries, as well as AA/AAA 1.5 V lithium and NiMH types. A mode switch allows the user to select between a general charging mode and a LiFePO?-specific mode, ensuring correct voltage and termination behaviour. Charge progress is shown through individual LEDs, and built-in protections manage over-charge, short-circuit conditions, and activation of deeply discharged cells where appropriate. Key features Four independent charging slots capable of handling different chemistries simultaneously. Automatic recognition of Li-ion, LiFePO?, 1.5 V lithium, and NiMH cell types. Support for a wide range of cylindrical sizes including 10440, 14500, 16340, 18350, 18500, 18650, 18700, 20700 and unprotected 21700. Compatibility with AA/AAA 1.5 V lithium and AA/AAA/A/SC NiMH cells. Selectable standard and LiFePO? charging modes. Automatic charge termination based on chemistry-specific detection methods. Low-voltage activation for suitable over-discharged cells. LED indicators for real-time charge status on each slot. Mechanical support for batteries between roughly 34 mm and 70 mm in length. Not compatible with protected 21700 cells due to extended length. Technical specifications Model: Xtar MX4 Mini Mixer Slots: 4 independent charging bays Supported chemistries: Li-ion 3.6/3.7 V, LiFePO? 3.2 V, 1.5 V lithium rechargeable, NiMH 1.2 V Input: USB-C, 5 V 2 A Charging current: Up to 1 A on two slots, or 0.5 A when all four slots are used Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Battery length range: Approx. 34–70 mm Supported Li-ion sizes (3.6/3.7 V): 10440, 14500, 16340, 18350, 18500, 18650, 18700, 20700, unprotected 21700 Supported NiMH sizes (1.2 V): AAA, AA, A, SC Supported 1.5 V lithium sizes: AA, AAA Charging modes: Standard mode and LiFePO? mode Charge indication: LED status lights per slot Protection features: Over-charge, short-circuit, and low-voltage activation Supported 21700 types: Unprotected only OPTIONAL BUNDLE: None, Inc USB-C Wall Adaptor + 4 x AA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AAA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AA & 4 x AAA Lithium Batteries, Inc 4 x AA Lithium Batteries, Inc 4 x AAA Lithium Batteries, Inc 4 x AA & 4 x AAA Lithium Batteries26,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VC4SL USB Battery Charger for Li-Ion and NiMH BatteriesThe VC4SL Battery Charger Set from Xtar includes a charger, USB-C to USB-C charge cable and manual, presented in a premium pouch. Designed for use with compatible AAAA, AAA, AA, A, SC, C, and Ni-MH/Ni-CD cells, as well as Xtar 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650, 32650 3.6V/3.7V Li-ion batteries, this specialist charger is cost-effective and versatile. This charger will charge 4 smaller cells or 2 large C cells simultaneously. With the capacity to charge up to four cells simultaneously or independently, the Xtar VC4SL battery charger is a practical option, while its intelligent design means that it can automatically detect battery types, and select the appropriate charging method and current for them (from 0.1A to 1.0A and up to 0.5A*4 / 1.0A*2 max). It will also notify you if the cells you are trying to charge are faulty or if it detects reverse polarity. The Xtar VC4SL charger's cycle has three stages to prolong the life of your cells, and a soft start to minimise drain and damage from sudden energy spikes. Dependable and safe, it also has an accurate LCD display. The maximum number of batteries which can be charged simultaneously is dependant on the type of battery used. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) AA/AAA 1.5V Li-ion charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This charger does not come with a wall adaptor and we recommend adding the 'optional bundle' when purchasing. This charger cannot be powered by a low power mobile phone charger and needs a 15W or 3A wall adaptor like a USB-C laptop or large tablet adaptor. OPTIONAL BUNDLE: None, Inc. Wall Adapter26,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MX8 8-Slot 1.5V, 3.7V Lithium & AA/AAA NiMH Smart ChargerThe Xtar MX8 is an eight-slot smart charger designed for environments where multiple rechargeable battery chemistries must be managed simultaneously. Each bay operates independently, applying charge profiles tailored to the cell type inserted. The platform supports 1.5 V lithium AA/AAA rechargeables, 1.2 V NiMH AA/AAA, and 3.6/3.7 V lithium-ion cylindrical cells, making it the first charger in its class capable of handling all three categories within a single system. USB-C input delivers regulated power to the internal distribution system, enabling consistent charging behaviour across all eight bays. Automatic identification assigns the appropriate voltage and termination method to each slot, while LED indicators provide real-time status feedback. The charger accepts a wide range of cylindrical sizes used in consumer electronics and industrial equipment, and does not impose a maximum battery capacity limit—the charger determines completion based on voltage detection rather than rated mAh. Key features Eight fully independent charging slots for simultaneous multi-chemistry operation. Supports all three major rechargeable types: 1.5 V AA/AAA lithium, 1.2 V AA/AAA NiMH, and 3.6/3.7 V lithium-ion (e.g. 18650 series). First charger in its category to accommodate all three chemistries in a single unit. No maximum battery capacity limitation; charging completion is determined by voltage behaviour, not rated mAh. Automatic recognition of chemistry and assignment of charge parameters. USB-C power input with regulated channel distribution. LED indicators providing charge and completion status for every slot. Cylindrical Li-ion support including 10440, 14500, 16340, 18500, 18650, and unprotected 21700. AA/AAA support for NiMH and 1.5 V lithium rechargeable types. Integrated short-circuit, over-charge and thermal protection systems. Low-voltage activation for lithium-ion cells that have dropped below normal operating voltage. Technical specifications Model: Xtar MX8 Smart Charger Total bays: 8 independent charging channels Supported chemistries: 3.6/3.7 V Li-ion, 3.2 V LiFePO?, 1.5 V lithium rechargeable, 1.2 V NiMH Input: USB-C, 5 V supply Charging current: Automatically allocated based on slot occupancy Li-ion formats: 10440–20700 and unprotected 21700 NiMH formats: AA, AAA 1.5 V lithium formats: AA, AAA Capacity limit: No maximum mAh rating; supported capacity is unrestricted Indicators: Dedicated LEDs for each slot Safety functions: Over-charge, short-circuit, thermal and low-voltage recovery 21700 support: Unprotected only OPTIONAL BUNDLE: None, Inc USB-C Wall Adaptor + 4 x AA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AAA Lithium Batteries, Inc USB-C Wall Adaptor + 4 x AA & 4 x AAA Lithium Batteries, Inc 4 x AA Lithium Batteries, Inc 4 x AAA Lithium Batteries, Inc 4 x AA & 4 x AAA Lithium Batteries51,95 £*Shipping: 2,49 £Secure redirect to the provider
-
How many watts does the fast charger have?
The fast charger has 25 watts. **
-
What is a fast charger for the iPhone 11?
A fast charger for the iPhone 11 is a charger that is capable of delivering higher power output to the device, allowing it to charge at a faster rate compared to standard chargers. These chargers typically support USB Power Delivery (USB-PD) technology, which enables faster charging speeds. Fast chargers for the iPhone 11 can significantly reduce the time it takes to recharge the device, making them a convenient option for users who need a quick battery top-up. **
-
Is there a fast charging cable for the charger?
Yes, there are fast charging cables available for chargers. These cables are designed to support higher power outputs, allowing devices to charge at a faster rate. When using a fast charging cable with a compatible charger and device, you can significantly reduce the time it takes to charge your device compared to a standard cable. It is important to ensure that both the cable and the charger support fast charging technology for optimal results. **
-
Why is the new Fast Charger Adapter not working?
The new Fast Charger Adapter may not be working due to a few possible reasons. It could be a compatibility issue with the device being charged, as not all devices are compatible with fast charging technology. Another reason could be a faulty adapter or cable, which may need to be replaced. Additionally, there could be an issue with the power source or outlet being used, so trying a different outlet or power source may help troubleshoot the problem. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.